Learn more about your tyres

About Tyres

Zenises versteht, dass, während Reifen von vielen Fahrern als "schwarz und rund" angesehen werden können, sind sie eigentlich ein bemerkenswertes Stück Automobiltechnik. Aber anstatt bamboozle Sie mit technischen Daten, haben wir zusammen eine einfache Anleitung, um Ihnen mit der Leistung Ihres Reifens und allgemeine Pflege und Wartung - und damit mit dem Fahrerlebnis zu helfen.
You should always remember that your tyres are the only point of contact your vehicle has with the road so you can appreciate why it is important that you select the right tyre type for the vehicle you are driving and for the purpose it is being used. It's also the law which requires your vehicle to be fitted with the correct type and size of tyre. Moreover, it's a good habit to regularly check all four tyres for pressure and general wear and tear - and don't forget to check the spare tyre too.
Probably the most important advice with regard to tyre care of these is to check the tyre's minimum tread depth. The legal limit for minimum depth of the tread on your tyres is 1.6 millimetres, across the central ¾ of the tread going around the complete circumference of the tyre.

Read on to find out more about your tyres and how to understand and care for them properly.

Kennenlernen Sie Ihren Reifen besser

1) Name des Herstellers oder Markenname

2) Das Modell des Herstellers oder Mustercode

3) Reifengröße, Nennquerschnittsbreite (ausgedrückt in mm zB 205), Seitenverhältnis der Höhe zu Breite (Höhe der Reifenseitenwand als Prozentsatz der Breite, zB 55% oder 55); Und der Felgendurchmesser-Code (der Durchmesser des Reifen-Zentrals "Loch" in Zentimeter zB 16 "Der Buchstabe zwischen den Zahlen ist die Bauart, meist 'R' für 'Radial', zB 205 / 55R16.

4) Servicebeschreibungen (Load Index + Speed ​​Symbol). Im Diagramm bezeichnet die Figur 91 die maximale Gewichtskapazität des Reifens gemäß der offiziellen Lastindextabelle, die übersetzt wird

615 Kg, Der Buchstabe V gibt die Geschwindigkeitsbewertung des Reifens an, in diesem Fall der Reifen, der für Autos geeignet ist, die eine maximale Fahrzeuggeschwindigkeit von 240 km pro Stunde erreichen können.

5) ECE (Wirtschaftskommission für Europa) Verordnung 30 Konformitätsgenehmigungsnummer - das bedeutet, dass der Reifen den Normen der europäischen Regulierungsbehörden entspricht.

6) EWG-Geräusch-Zulassungsnummer - das bedeutet, dass das vom Reifen erzeugte Geräusch innerhalb der genehmigten europäischen Grenzwerte liegt.

7) USA Dept of Transport Hersteller-Code - oft als DOT-Nummer bezeichnet, die in Europa keine Bedeutung hat

8) Datum der Herstellung - ein sehr wichtiger Code, wie das Alter eines Reifens seine Leistung beeinträchtigen kann. Die ersten beiden Zahlen beziehen sich auf die Produktionswoche (zB 18 = Woche 18) und die dritte und fouth Zahlen beziehen sich auf das Herstellungsjahr (zB 00 = 2000, 15 = 2015)

9) USA UTQG Qualitätsstufen - keine Bedeutung in Europa

10) USA Maximale Reifenbelastung - keine Bedeutung in Europa

11) USA Maximaler Reifen-Inflationsdruck - keine Bedeutung in Europa

12) Bezeichnet "Tubeless" Bauart

13) Sicherheitswarnung - bezieht sich auf die Gefahren der Unterinflation / Überlastung und die Montage von Reifen zusammen mit dem Risiko einer starken Überblasung.

14) Drehrichtung - nur für Richtungsmuster Reifen

15) Außen- (Innen-) Seitenwand - bezieht sich nur auf asymmetrische Musterreifen. Diese Reifen haben unterschiedliche Laufflächenmuster an ihrer Innen- und Außenseite und bieten eine verbesserte Leistung und müssen korrekt montiert werden.

16) Extra Load - bedeutet, dass es eine höhere Tragfähigkeit als ein Standard-Lastreifen hat. "Verstärkt" wird manchmal als alternative Kennzeichnung zu "Extra Load"

17) TWI-Laufflächenbeleuchtungsindikatoren - erhöhte Flächen an der Basis der Laufflächenrillen, um als eine visuelle Warnung zu dienen, wann der Reifen sich nähert oder an der gesetzlichen Mindestgrenze.

Tyre speed rating


All tyres are marked with a speed rating letter that corresponds to the maximum speed a vehicle can travel under conditions specified by the tyre manufacturer. These speed indexes are calculated when tyres are in a new condition. So these ratings do not apply to tyres which are damaged, under or overinflated, overloaded or repaired. And remember, just because you may have tyres which can perform at high speeds, no manufacturer would recommend driving above the legal speed limit.

The speed rating of a tyre is represented by a letter on the sidewall. For example, the "T" rating in the table below, tells us that this tyre can reach speeds of up to 190 kilometres per hour or 118mph. So when you know your tyre speed rating, you can calculate what is the maximum speed your tyre is capable of running.

Read on . . .
Speed ratings are based on tests in which tyre engineers run the tyre at increasing speed increments, every 10 minutes, until the particular speed rating has been met.

Tyre load rating


The load index is a numerical code corresponding to the maximum load a tyre can carry at a speed indicated by its speed symbol under service conditions specified by the tyre manufacturer.

Read on . . .
The following table shows what the weight that each index specification is able to carry:

Lastindex Gewicht jedes Reifens [kg]
19 77,5
20 80
21 82,5
22 85
23 87,5
24 90
25 92,5
26 95
27 97,5
28 100
29 103
30 106
31 109
32 112
33 115
34 118
35 121
36 125
37 128
38 132
39 136
40 140
41 145
42 150
43 155
44 160
45 165
46 170
47 175
48 180
49 185
50 190
51 195
52 200
53 206
54 212
55 218
56 224
57 230
58 236
59 243
60 250
61 257
62 265
63 272
64 280
65 290
Lastindex Gewicht jedes Reifens [kg]
66 300
67 307
68 315
69 325
70 335
71 345
72 355
73 365
74 375
75 387
76 400
77 412
78 425
79 437
80 450
81 462
82 475
83 487
84 500
85 515
86 530
87 545
88 560
89 580
90 600
91 615
92 630
93 650
94 670
95 690
96 710
97 730
98 750
99 775
100 800
101 825
102 850
103 875
104 900
105 925
106 950
107 975
108 1000
109 1030
110 1060
111 1090
112 1120
Lastindex Gewicht jedes Reifens [kg]
113 1150
114 1180
115 1215
116 1250
117 1285
118 1320
119 1360
120 1400
121 1450
122 1500
123 1550
124 1600
125 1650
126 1700
127 1750
128 1800
129 1850
130 1900
131 1950
132 2000
133 2060
134 2120
135 2180
136 2240
137 2300
138 2360
139 2430
140 2500
141 2575
142 2650
143 2725
144 2800
145 2900
146 3000
147 3075
148 3150
149 3250
150 3350
151 3450
152 3550
153 3650
154 3750
155 3875
156 4000
157 4125
158 4250
159 4375
Lastindex Gewicht jedes Reifens [kg]
160 4500
161 4625
162 4750
163 4875
164 5000
165 5150
166 5300
167 5450
168 5600
169 5850
170 6000
171 6150
172 6300
173 6500
174 6700
175 6900
176 7100
177 7300
178 7500
179 7750
180 8000
181 8250
182 8500
183 8750
184 9000
185 9250
186 9500
187 9750
188 10000
189 10300
190 10600
191 10900
192 11200
193 11500
194 11800
195 12150
196 12500
197 12850
198 13200
199 13600
200 14000
201 14500
202 15000
203 15550
204 16000

Tyre Types


Radial ply tyres are now the most common tyres in use on European roads representing well over 90% of all tyres fitted today. Some radial ply tyres now have a run flat capability known as Self Supporting Run Flat (SST) tyres which are becoming more common as these tyres are now fitted as original equipment on many vehicles.

Older cross-ply (or diagonal) tyres are now very rarely seen and have effectively been replaced by radial ply tyres. Cross-ply construction tyres are more common on 'vintage' or 'classic' vehicles.
Radial ply tyres may be either steel or textile braced and are identified in the size marking by the letter "R" and often the word "Radial".

Self Supporting Run Flat (SST) tyres are designed to provide a limited driving run on period following a puncture. These are identified by the letters "RF" in the size marking. To be categorised as a run flat tyre, the minimum distance they must achieve in a run flat condition is 80 km (50 miles) at a maximum speed of 80 km/h (50 mph) and at a minimum of 80% of their maximum load capacity.
It is essential the vehicle is equipped with a tyre pressure monitoring system to enable use of run flat tyres.

Tyre Patterns


a) Non-Directional Tyres

The most common tyre pattern type is the non-directional pattern which has no special requirement with regard to orientation and position when fitting on to the vehicle. The tyre performance is not dependent on the direction of rotation.

b) Directional Tyres

A trend originally seen with the growth of high performance cars is the directional pattern which intends to provide better straight line stability. These patterns must be fitted the correct way round on the wheel and also the position on the vehicle to ensure the correct direction of rotation is achieved.

c) Asymmetric Tyres

As car performance improves, tyre design must keep pace and asymmetric patterns are becoming more common, especially on modern 'performance' cars. The pattern is different either side of the centre rib, and is intended to be a better balance between wet and dry handling.

Except in the case of temporary use spare tyres supplied as original equipment, it is dangerous to mix tyres of different types on the same axle. It is also advised that the same tyre type is fitted to all wheel positions.

Keep the pressure correct


Recommended tyre inflation pressures for your vehicle can be found in the vehicle handbook and/or mounted on the vehicle bodywork (for example within the door cavity or inside the fuel cap). Correct pressures are related to loads, speeds and vehicle handling and are vital for maximum safety, braking, grip and good tyre life.

Prolonged under-inflation causes excessive flexing, deterioration of the casing and rapid wear of the tread shoulders. The vehicle will also consume more fuel. Over-inflation results in an uncomfortable ride, a reduced area of contact with the road, accelerated wear on the tread centre and makes the tyre more susceptible to impact damage.

Inflation pressure should be checked at least every two weeks and only when the tyre is cold, since there is an increase in pressure when the tyre has warmed up after being run.
A reliable and accurate pressure gauge should be used.

Tyre inspection and maintenance


Examine your tyres regularly, removing stones and other objects embedded in the tread. If you see the tyre has lumps or bulges it must be examined by a tyre specialist since these could indicate internal damage. Wipe away oil or grease with a suitable diluted detergent.

Read on . . .

Watch your tread

Tyre treads are designed to give good grip on wet roads, but in general wet grip decreases as tyre tread pattern wears down or as the depth of water increases. Motorists should take this into consideration and reduce speed when it is wet.The legal minimum tread depth in Europe is 1.6mm throughout a continuous band comprising the central three-quarters of the breadth of tread and round the entire outer circumference of the tyre. However tyre wet grip deteriorates more rapidly in the second half of its tread life and stopping distances in wet weather can dramatically lengthen. It is therefore advisable consideration is given to replacing tyres well before they reach the legal minimum. Tyre industry experts recommend replacing tyres at a remaining tread depth of 3mm - especially if you are running on winter tyres.

Tyre repairs


Repairs to car tyres must only be carried out by a tyre specialist and in accordance with existing regulations (for example the current British Standard AU159). Permanent repairs can only be carried out following removal of the tyre from the wheel to allow a thorough inspection internally as well as externally to ensure there is no hidden damage which could result in a catastrophic failure.

To avoid such a hazard, neither externally applied plug repairs, nor liquid sealants may be considered as a permanent repair. Tyre manufacturers cannot be held responsible for problems resulting from their use.

For repairs to run flat tyres, consult the relevant tyre manufacturer.

Read on . . .

Wheels and rims

It is essential the wheel size is an approved fitment for the tyre and vehicle concerned. Tyres must not be used on damaged, distorted or modified wheels since this could result in tyre damage, deflation and possible loss of control of the vehicle.

Removal and fitting of tyres

These operations should only be entrusted to a trained tyre specialist who has the necessary equipment and expertise. Inexpert fitting can result in injury and damage to tyres and wheels. Wheels should be balanced after tyres are fitted or replaced.

Other information

Driving over pot-holes, kerbs, speed humps etc even at low speed can result in the weakening or fracture of the tyre's structure. It is dangerous to re-inflate a tyre which has been run flat or seriously under inflated and such tyres should be removed for complete examination by a tyre specialist.

Tyre manufacturers cannot be held responsible for problems arising from modifications to their products, or the use of sealants which they have not approved.

Tyre Ageing and Servicing


The tyre industry has long recognised the consumer's role in the regular care and maintenance of their tyres. The point at which a tyre is replaced is a decision for which the owner of the tyre is responsible. The tyre owner should consider factors to include service conditions, maintenance history, storage conditions, visual inspections, and dynamic performance. The consumer should consult a tyre service professional with any questions about tyre service life. The following information and recommendations are made to aid in assessing the point of maximum service life.

Read on . . .
Tyres are designed and built to provide many thousands of kilometres (or miles) of excellent service. For maximum benefit, tyres must be maintained properly to avoid tyre damage and abuse that may result in tyre disablement. The service life of a tyre is a cumulative function of the storage, stowing, rotation and service conditions, which a tyre is subjected to throughout its life (load, speed, inflation pressure, road hazard injury, etc.). Since service conditions vary widely, accurately predicting the service life of any specific tyre in chronological time is not possible.

Tyres should be removed from service for numerous reasons, including tread worn down to minimum depth, damage or abuse (punctures, cuts, impacts, cracks, bulges, under inflation, overloading, etc). For these reasons tyres, including spares, must be inspected routinely, i.e., at least once a month. This routine inspection should occur whether or not the vehicle is equipped with a tyre pressure monitoring system (TPMS). Regular inspection becomes particularly important the longer a tyre is kept in service. If tyre damage is suspected or found, it is recommended that the consumer has the tyre inspected by a tyre service professional. Consumers should use this consultation to determine if the tyres can continue in service. It is recommended that spare tyres be inspected at the same time.

Consumers are strongly encouraged to be aware of their tyres' visual condition, such as cracking/crazing of the tread/sidewall rubber. Also, they should be alert for any change in dynamic performance such as increased air loss, noise or vibration. Such changes could be an indicator that one or more of the tyres should be immediately removed from service to prevent a tyre disablement. Also, the consumer should be the first to recognize a severe in-service impact to a tyre and to ensure that the tyre is inspected immediately thereafter.Tyre storage, stowage and rotation are also important to the service life of the tyre.There is no known technical data that supports a specific tyre age for removal from service.

However, in the interests of safety a number of vehicle and tyre manufacturers recommend that tyres (including spare tyres) that were manufactured more than a certain number of years previously be replaced with new tyres, even when they appear to be usable from their external appearance and the tread may not have reached the minimum wear out depth. It is recommended that any such instruction be followed. Consumers should note that most tyres would have to be removed for tread wear-out or other causes before any prescribed age is reached. A stated removal period in no way reduces the consumer's responsibility to replace tyres as needed.

The chronological age of any tyre can be found on the tyre sidewall by examining the characters following the symbol "DOT".

For tyres manufactured after the year 1999, the last four numbers identify the date of manufacture of the tyre to the nearest week. The first two of these four numbers identify the week of manufacture (which range from "01" to "52"). The last two numbers identify the year of manufacture (e.g., a tyre with the information "DOT XXXXXX2713" was manufactured in the 27th week of 2013).